Gloss Finishing Wax 130g

1. Sand piece immaculately down to at least 400 grit;

2. For best results, apply sanding sealer and burnish when dry;

3. Evenly apply a light coat of the wax with a soft paper towel;

4. Allow to dry a little and then buff. (Drying times vary, depending on ambient temperature and humidity;

5. Apply additional coats for a deeper shine.

Use for the finishing of decorative and functional wood-turned items on a lathe. It can also be used on ‘flat’ woodwork using a polishing mop to buff. On finished items, avoid contact with water.

Creamy yellow in the tin. Characteristic aroma of solvents and waxes.

Store in a cool, dry place, ideally between 10° and 30°C (50° and 90°F) Where possible. Protect from extreme heat and freezing. Keep out of direct sunlight.

Kept according to instructions, you can expect the product to last around two years from opening, depending on how often it is used.

Yes. Tested to EN71-3.

SAFETY FIRST! Always read product labels, wear appropriate PPE and take steps to ensure the safety of your workshop environment and the people in it!

Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% arom.

DANGER. Flammable solid. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well ventilated area. Store locked up. Dispose of contents/container in accordance with local / regional / national / international regulations.