~ Basic Application as an Overcoat
- Sand piece immaculately down to at least 400 grit;
- For best results, apply sanding sealer and burnish when dry;
- Apply a little Microcrystalline Wax in a thin coat. Allow to dry.
- Buff to a shine by hand, a buffing mop or for lathe items, a paper towel.
- Apply additional coats as required.
Use as an overcoat to other finishes to provide a fingerprint-resistant surface. It can also be used as a finish on its own. Also, Microcrystalline Wax can coat other items such as leather and metal.
~ Colour and Aroma
Pure white in the tin and applies completely clear. It has the aroma of solvent and wax.
Lacquer lined tin containing 130g of product.
Store in a cool, dry place, ideally between 10° and 30°C (50° and 90°F) Where possible. Protect from extreme heat and freezing. Keep out of direct sunlight.
~ Longevity – Use By
Stored correctly and depending on usage, this product will last more than 2 years in the tin after opening.
~ Food Contact and Toy Safe?
Yes. Tested to EN71-3.
SAFETY FIRST! Always read product labels, wear appropriate PPE and take steps to ensure the safety of your workshop environment and the people in it!
~ Product Label Warning
Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% arom.
DANGER. Flammable solid. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well ventilated area. Store locked up. Dispose of contents/container in accordance with local / regional / national / international regulations.
~ Product Warning Symbols
Product warning symbols are displayed on products to highlight the potential dangers of some of the contents of the products – this is usually the solvents. In many cases, the warnings are irrelevant once the solvent has evaporated.
~ Safety Data Sheet
As the manufacturer, we cannot know all the uses the product may be used for. It is the user’s responsibility to determine suitability of use. If in doubt, contact us for advice.