Gloss Finishing Wax

~ Basic Application

1. Sand piece immaculately down to at least 400 grit;
2. For best results, apply sanding sealer and burnish when dry;
3. Evenly apply a light coat of the wax with a soft paper towel;
4. Allow to dry a little and then buff. (Drying times vary, depending on ambient temperature and humidity;
5. Apply additional coats for a deeper shine.

~ Uses

Use for the finishing of decorative and functional wood-turned items on a lathe. It can also be used on ‘flat’ woodwork using a polishing mop to buff.

~ Colour and Aroma

Creamy yellow in the tin. Characteristic aroma of solvents and waxes.

~ Container

They are supplied in a lacquer lined tin with 130g of product inside.

~ Storage

Store in a cool, dry place, ideally between 10° and 30°C (50° and 90°F) Where possible. Protect from extreme heat and freezing. Keep out of direct sunlight.

~ Longevity – Use By

Kept according to instructions, you can expect the product to last around two years from opening, depending on how often it is used.

~ Food Contact and Toy Safe?

Yes. Tested to EN71-3.

SAFETY FIRST! Always read product labels, wear appropriate PPE and take steps to ensure the safety of your workshop environment and the people in it!

~ Product Label Warning

Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% arom.
DANGER. Flammable solid. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well ventilated area. Store locked up. Dispose of contents/container in accordance with local / regional / national / international regulations.

~ Product Warning Symbols

Product warning symbols are displayed on products to highlight the potential dangers of some of the contents of the products – this is usually the solvents. In many cases, the warnings are irrelevant once the solvent has evaporated.

~ Safety Data Sheet

~ Liability

As the manufacturer, we cannot know all the uses the product may be used for. It is the user’s responsibility to determine suitability of use. If in doubt, contact us for advice.