High-Performance Medium CA Glue in a bottle with a helpful thin nozzle for accurate application.
Perfect for use with a recently added range of inlay powders and sands, this glue is non-yellowing and has a fast curing time which can be sped up with a squirt of the Activator Spray. This glue will also be helpful for small crack filling.
~ Basic Application
- Make sure surfaces to be bonded are clean and dry.
- Dispense a drop or drops to one surface only.
- Press parts together firmly for a few seconds
Use for filling thin cracks in wood and joining non-structural pieces together.
~ Colour and Aroma
Clear in the bottle and when applied. It will darken wood when applied and prevent products such as colours and finishes from penetrating. Characteristic aroma of cyanoacrylate glues.
Supplied in a 50g plastic bottle with an applicator tip.
Store in a cool, dry place, ideally between 10° and 30°C (50° and 90°F) Where possible. Protect from extreme heat and freezing. Keep out of direct sunlight.
~ Longevity – Use By
Kept according to instructions, you can expect the product to last around 12 months from opening, depending on how often it is used. Left alone, it is slow drying.
~ Food Contact and Toy Safe?
Unknown – Product has not been tested.
SAFETY FIRST! Always read product labels, wear appropriate PPE and take steps to ensure the safety of your workshop environment and the people in it!
~ Product Label Warning
DANGER: Contains – ETHYL-2-CYANOACRYLATE. Bonds skin and eyes in seconds. Keep out of reach of children. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. Use only outdoors or in a well ventilated area. Wear protective clothing, eye protection, face protection. IF ON SKIN: Wash with plenty on soap and water. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Call a doctor or poison centre if you feel unwell. Store locked up.
~ Product Warning Symbols
Product warning symbols are displayed on products to highlight the potential dangers of some of the contents of the products – this is usually the solvents. In many cases, the warnings are irrelevant once the solvent has evaporated.
~ Safety Data Sheet
As the manufacturer, we cannot know all the uses the product may be used for. It is the user’s responsibility to determine suitability of use. If in doubt, contact us for advice.