CA Glue Activator Spray

Hampshire Sheen CA Glue Activator Accelerator

This CA Glue Activator Spray is a super-handy product to keep nearby when using our high-performance CA glues to speed up the curing time.

A quick squirt with the directional nozzle, and you will be on your way.


~ Basic Application

  1. The surfaces to be glued should be clean and free from dust, grease and other contaminants,
  2. Lightly spray one of the surfaces to be bonded with the activator,
  3. Allow the activator to dry,
  4. Apply a thin layer of one of the Hampshire Sheen CA Glues to the other surface.
  5. Bring both parts together to achieve a bond.
  6. Depending on the substrates being used and temperature, a rapid bond will typically be formed in 2-10 seconds

~ Uses

Use for quickly activating and setting our CA Glue products.

~ Colour and Aroma

Clear spray and non-yellowing when dry. Characteristic aroma of solvent.

~ Container

Supplied in a 200ml aerosol spray.

~ Storage

Store in a cool, dry place, ideally between 10° and 30°C (50° and 90°F) Where possible. Protect from extreme heat and freezing. Keep out of direct sunlight.

~ Longevity – Use By

Kept according to instructions, you can expect the product to last around 12 months from opening, depending on how often it is used. Left alone, it is very slow drying.

~ Food Contact and Toy Safe?

Unknown – Product has not been tested.

 

SAFETY FIRST! Always read product labels, wear appropriate PPE and take steps to ensure the safety of your workshop environment and the people in it!



~ Product Label Warning

DANGER: Contains Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane, Hydrocarbons, C^. Extremely flammable aerosol. Pressurised container. May burst if heated. Keep out of reach of children. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing fumes, gas, mist, spray, vapours. Wash hands thoroughly after handling. Use only outdoors or in a well ventilated area. Avoid release into the environment. Wear protective clothing, eye and face protection and protective gloves. IF ON SKIN: Wash with plenty on soap and water. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a doctor or poison centre if you feel unwell. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Store locked up.


~ Product Warning Symbols

Product warning symbols are displayed on products to highlight the potential dangers of some of the contents of the products – this is usually the solvents. In many cases, the warnings are irrelevant once the solvent has evaporated.

~ Safety Data Sheet

~ Liability

As the manufacturer, we cannot know all the uses the product may be used for. It is the user’s responsibility to determine suitability of use. If in doubt, contact us for advice.